Zykon-Panel anchor FZP II T Tergo+

The specialist for thin fibre cement façade panels by Equitone.

The concealed fixing solution for thin fibre cement façade panels from Equitone bigger than 8 mm in thickness, such as linea, tectiva, materia, natura, pictura. Use in conjunction with clasps systems on façades or with other attachments.

Product Description

Advantages
  • The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
  • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
  • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
  • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
  • The positive-locking anchor is free from expansion pressure and is attached at the fifth point in a structurally optimised location. This provides much better holding force than commonly available systems and allows for the use of large-format panels.

Available Product Variants


5 Product variant (s) found

5 Product variant (s) found

Variant
Installed anchor length
Anchorage depth

hef

Projection length
Thread

M

8.5 [mm]

6 [mm]

10 [mm]

M 6

8.5 [mm]

6 [mm]

13 [mm]

M 6

10.5 [mm]

8 [mm]

10 [mm]

M 6

10.5 [mm]

8 [mm]

13 [mm]

M 6

12.5 [mm]

10 [mm]

9 [mm]

M 6

Viewed 5 of 5 variant (s)
0

Application and Permission

Applications
  • Exterior façades
  • Interior façades
  • Façade reveals
Building materials
  • Equitone fibre cement (>8mm)
* You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

Functionality
  • Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
  • When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
  • The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
fe80::302c:49b:f52e:7cbf%4