The pronounced edge keeps the expansion clip in position, even when reinforcements are hit and provides a safe installation.
The interaction of cone and expansion clip increases the tension load-bearing capacity significantly and enables minimum axial- and edge spacing.
Optionally with pre-assembled normal washer or large washer GS. Also available with washer HBS after timber construction standard DIN 1052.
The protruding hammer-in cone protects the thread from damages during the setting.
Versions with cap nut
The new versions with special, high cap nuts (M10 and M12) are ideal for architecturally demanding applications and offer visually attractive anchoring. In addition, the cap nut protects against injury due to its closed shape.
The FAZ II is the only anchor with cap nut and ETA Option 1!
NEW: Variable anchorage depths
Allows adjustments to the loads with millimetre accuracy (M6 - M16)
Highest load at maximum anchorage depth FAZ II 10 A4 60mm
Anchorage depth = maximum allowed tension load 6,2 kN and shear load of 15,1 kN.
For anchorage depths between 40 and 60mm, the permissible loads may be calculated accordingly.
Fast installation through reduced anchroage depths FAZ II 10 A4 40mm
Anchorage depth = allowed tension load of 4,3 kN and shear load of 11,3 kN.