Application picture
Application picture
1   1

fischer one-component gun foam PUP P 750 G B2

The economic adhesive foam for perimeter insulation boards.

Art.-No. 506671
Top Features
  • General building authority test certificate.
  • Good adhesion to cold bitumen sheeting and bitumen coatings.
  • Building material class B2.
  • Low post-expansion.
  • Foam yield of extruded foam 45 l.

Sales to



Product Description

fischer perimeter adhesive foam PUP P 750 for bonding expanded polystyrene panels, insulating and filling wall penetrations, filling joints and cavities in all internal constructions. Colour: concrete-grey. General building authority test certificate High yield of extruded foam up to 45 l - enables bonding over a wall area of approx. 13 m² . Handling with the system gun and can results in time savings of approx. 30 %.
  • The high foam yield allows for the bonding of approx. 13 m² of wall space, and is therefore especially economical.
  • The use of the can/gun system provides a time saving of approx. 30% and thus guarantees efficient work.
  • The special PU foam formulation ensures the best adhesion to concrete and bituminous substrates, and allows for the long-term fixing of insulation boards.
  • The very low level of post-expansion avoids the formation of cavities and guarantees a long-lasting insulation.
  • The new non-sticking safety valve guarantees long-lasting functionality.

Application and Permission

  • Bonding expanded polystyrene panels
  • Insulating and filling wall penetrations
  • Foaming in electrical installations
  • Filling joints and cavities in all internal constructions
  • Fixing and sealing walls and ceilings
Building materials
  • Concrete
  • Bitumen coatings
  • Anodised layer
  • Gypsum plasterboard
  • Wood
  • Cold bitumen sheeting
  • Plastics (not on PE, PP, Teflon, silicone)
  • Masonry
  • Metals with priming coat
  • Plaster
* You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

  • 1-component PU foam
  • Building material class B2
  • Processing temperature environment: +10 °C to +25 °C (can temperature: +5 °C to +25 °C)
  • Non-tacky after approx. 10 minutes
  • Can be cut after approx. 40 minutes
  • Temperature resistant from -40 °C to +90 °C
  • Low heat conductivity
  • Apply a min. of 3 end-to-end stripes per board, vertically from bottom to top on the external wall (spacing approx. 30 cm). The bottom board should be on fixed ground as protection from later slipping. After approx. 10 minutes apply the boards onto the holding surface and press hard.
  • Fresh foam stains can be removed immediately with fischer PU cleaner.

Technical Data

Technical Data

Content per can 750 [ml]
Max. foam yield (free foaming) 45 [l]
Amount 1 Unit(s)
GTIN (EAN Code) 4048962076141

Documents for Downloading