The suspension anchor with the fischer Vertical Solution for natural stone or artificial concrete panels.

Zykon panel anchors FZP II VS

The undercut anchor for a concealed stand-off installation soution for heavy natural stone façade panels. This anchor can only be used with the fischer Vertical Solution subframe system. Suspension brackets designed based on a lock and key principle are used to install the undercut anchors. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. Panel thicknesses are thus compensated. A completely flat façade surface is created.

Product variants

Download of image data

Product variants

Approvazioni / rapporti di prova

3 Varianti del prodotto

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Legenda = Omologazione disponibile— = Omologazione non disponibile

Visualizzate 3 di 3 varianti

Advantages

Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.

Functionality

The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
The anchor is installed stand-off installation.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Suspension brackets designed on a lock and key principle are also used during installation
Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 6

ETA-approval
Min. panel thickness	20 mm
Embedment depth ( h₁ )	12 - 16 mm
Total length ( l )	25,5 mm
Installed anchor length ( a )	21 mm
Remaining thread length ( b )	4,5 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962112580

ETA-approval
Min. panel thickness	30 mm
Embedment depth ( h₁ )	15 - 21 mm
Total length ( l )	30,5 mm
Installed anchor length ( a )	26 mm
Remaining thread length ( b )	4,5 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962112597

ETA-approval
Min. panel thickness	30 mm
Embedment depth ( h₁ )	15 - 25 mm
Total length ( l )	34,5 mm
Installed anchor length ( a )	30 mm
Remaining thread length ( b )	4,5 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962112603

Zykon panel anchors FZP II VS

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download