The undercut anchor for thin fibre cement façade panels by Equitone.

Zykon panel anchors FZP II T PA Tergo+

The undercut anchor for a concealed fixing of EQUITONE fibre cement panels. Use in conjunction with clasp systems or with other attachments.

Varijante proizvoda

Odobrenja / Izveštaji o ispitivanju

5 Varijanta(e) proizvoda

Min. panel thickness

Total length

Thread

Cylindrical diameter

Undercutdiameter

Contents

Legenda = Dostupna dozvola— = Dozvola nije dostupna

Pregledano 5 od 5 varijanti

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Functionality

Dry drilling in fibre cement.
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
Drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
Stress-free and geometrical inter-locking fixing.

Mounting Strip 1 Picture

1 / 4