FAZ II
The powerful anchor for highest demands
FAZ II

Product highlights

  1. The distinctive edge holds the expansion clip in position even with reinforcement hits, thus ensuring safe installation.
  2. The interaction of cone and expansion clip significantly increases load-bearing capacity and makes minimum edge distance and axial spacing possible.
  3. With a choice of pre-assembled normal washer or large washer GS and with washer HBS in compliance with wood construction standard DIN 1052 (not pre-assembled).
  4. The protruding hammer-in pin protects the thread from damage during setting.
 

Your advantages at a glance:

Fewer and smaller anchors are required:
With the new ETA assessment for Option 1 the tension loads are increased up to 10% and the shear loads up to 17%. So fewer and smaller anchors are required.
Suitable for pre-positioned and push-through installation:
The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation.
Worldwide novelty:
FAZ II 6: First bolt anchor with drill-hole diameter 6 mm and ETA Option 1 worldwide, for safe and approved anchorage.
Experts report:
Experts report for use in concrete C12/15 and C80/95.
Covering the use of hollow drills and diamond drills:
The assessment document covers the use of hollow drills and diamond drills.

FAZ II. The champion among the bolt anchors. Powerful & flexible.

The fischer FAZ II is the steel anchor for the highest demands - for heavy loads in cracked concrete.
The FAZ II can be used particularly flexibly thanks to its simple installation. The proven expansion clip safely guides the loads into the concrete and enables the highest load-bearing capacity.


Quick and easy installation of bolt anchors.

The FA-ST II bolt anchor setting tool allows for quick and easy installation of bolt anchors, saving significant installation time in particular during series installation. The projecting thread of the anchor is not damaged during hammering. The bolt anchor setting tool FA-ST II is suitable for commonly available hammer drills (2 - 3 kg) with SDS adapter. Specialised bolt anchors such as the FAZ II, FBN II, FBZ and EXA can be installed using push-through installation more quickly, easily, and safely using the FA-ST II. The setting tool ensures optimal handling, thanks to its low weight

More information

Versions with cap nut

The new versions with special, high cap nut (M10 and M12) are optimal for architecturally demanding applications and offer a visually attractive anchorage. In addition, the cap nut protects against injuries due to its closed shape.

The FAZ II is the only anchor with cap nut and ETA option 1!


Applications

Facade substructure construction

Facade substructure construction

Railing construction

Railing construction

Timber railing construction

Cable trays

Pipe routes

Tension anchor

cd-green-7c944fd455-d5bb4