Application picture
Application picture
1   1

fischer Render fixing DIPK 10/100-120

The economical hammerfix anchor with plastic nail.

Art.-No. 43970
Top Features
  • No marks on the plaster surface. Glass fibre reinforced plastic nail reduces heat transmission.
  • Hammerset installation saves time.
  • Low setting depth reduces amount of drilling. This saves time and costs.
  • Flexible in use for plaster façades and rear-ventilated façades.
  • An insulation disc is a good base for render.

Sales to



Product Description

The fischer drive anchor DIPK 10 consists of a white anchor sleeve with integrated plate and a glass-fibre reinforced plastic nail. The DIPK 10 is set using a hammer. Driving in the nail causes the anchor shaft to expand in the building material. The GRP nail needs to be shortened at the tapered, predetermined breaking point when used in solid building materials. The fischer drive anchor DIPK 10 is ideal for fixing pressure-resistant insulating materials up to 160 mm thickness such as polystyrene boards, light building boards made of wood wool, and PU panels in concrete, solid and perforated brick.
  • The glass-fibre-reinforced plastic nail (GRP nail) reduces the heat transmission and prevents marks on the plaster surface.
  • The simple hammerset installation allows for a quick installation process and thus reduces workload.
  • The well-proven design with low anchorage depth reduces the amount of drilling required, thus achieving a high level of efficiency.
  • The DIPK can be used universally in rear-ventilated curtain façades, as well as in plaster façades.

Application and Permission

To fix pressure-resistant insulating materials in façades, such as:
  • Polystyrene boards
  • Light building boards made of wood wool
  • Cork boards / coir matting
  • PU panels
Building materials
  • Concrete
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Natural stone with dense structure
  • Solid brick
* You can find detailed information on building materials in the registration document.

Assembly Instruction

  • Non-bearing layers, such as adhesive and/or old render, are to be included in the anchor's useful length.
  • The DIPK is set in push-through installation using a hammer.
  • In solid materials the GRP nail needs to be shortened at the predetermined breaking point.
  • Driving the nail into the anchor shaft causes the DIPK to expand in the base material.
Installation graphic
Installation graphic
Installation graphic
Installation graphic

Technical Data

Technical Data

Drill hole diameter 10 [mm]
Usable length 110 - 120 [mm]
Min. drill hole depth 40 [mm]
Effect. anchorage depth 30 [mm]
Nail length 157 [mm]
Fixing length 150 [mm]
Amount 200 Unit(s)
GTIN (EAN Code) 4006209439708