Product Picture
Application Picture
Application Picture
1   1

fischer bolt anchor FWA 6 x 40

The cost-effective fixation without approval - for use in non-cracked concrete.

Art.-No. 45536
Top Features

Product Description

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.
Advantages
  • The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • Available with metric and imperial threads

Application and Permission

Applications
  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Fa├žades
Building materials
  • Concrete C20/25, non-cracked
* You can find detailed information on building materials in the registration document.
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The FWA is suitable for pre-positioned and push-through installation.
  • Prior to installation, place the hex nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hex nut).
  • When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Technical Data

Technical Data

Drill diameter 6 [mm]
Min. drill hole depth for through fixings 40 [mm]
Anchor length 40 [mm]
Width across nut 10 [mm]
Amount 100 [pcs.]
GTIN (EAN-Code) 4006209455364

Documents for Downloading

Additional Documents

fe80::1023:4:f52e:7cbe%5