The cost efficient fixing with ETA for non - cracked concrete.

Bolt anchor FXA

The fischer bolt anchor FXA is the cost-efficient fixing solution for mid and low load performance in non-cracked concrete. The FXA is offered from M8 - M16 in zinc-plated and stainless steel.

Product variants

Download of image data

Product variants

Approvazioni / rapporti di prova

28 Varianti del prodotto

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Thread

Width across nut

Amount

Legenda = Omologazione disponibile— = Omologazione non disponibile

Più risultati

Visualizzate 18 di 28 varianti

Advantages

ETA approval Option 7 for non-cracked concrete ensure a high quality standard.
The standard anchorage depth of FXA achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
The drive-in pin protects the thread from damage and ensures a faster installation and dismantling of the attachment.
The full range M8 - M16 in zinc plated and stainless steel allows a wide field of indoor and outdoor applications.
Quick and easy installation is possible with the help of the FA-ST II setting tool.

Functionality

The FXA is suitable for pre-positioned and push-through installation.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Mounting Strip 1 Picture

1 / 5

1
2
3
4
5

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	61 mm
Anchor length ( l )	65 mm
Thread ( M )	M8
Width across nut	13 mm
Amount	50 pcs
GTIN (EAN-Code)	4048962433951

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	66 mm
Anchor length ( l )	70 mm
Thread ( M )	M8
Width across nut	13 mm
Amount	50 pcs
GTIN (EAN-Code)	4048962433968

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	86 mm
Anchor length ( l )	90 mm
Thread ( M )	M8
Width across nut	13 mm
Amount	50 pcs
GTIN (EAN-Code)	4048962433975

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	106 mm
Anchor length ( l )	110 mm
Thread ( M )	M8
Width across nut	13 mm
Amount	50 pcs
GTIN (EAN-Code)	4048962433982

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	78 mm
Anchor length ( l )	85 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	50 pcs
GTIN (EAN-Code)	4048962433999

Bolt anchor FXA

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download