Product Picture
Application Picture
Application Picture
1   1

fischer Nail anchor FNA II 6 x 30/75 with nail head electro zinc plated

The installation-friendly Hammerset anchor for multiple fixings.

Art.-No. 44118
Top Features
  • Hammerset installation saves time.
  • No reinforcement hits due to low anchorage depth This saves time and costs during series installation.
  • Expansion clip provides a firm hold.
  • ETA approval for multiple fixings.
  • Series installation possible with setting tool for the hammer drill. This saves time and costs.

Product Description

The fischer nail anchor FNA II 6 with nail head is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing fire protection boards, wire and nonious hangers in internal areas.
Advantages
  • The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
  • The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
  • The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
  • The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
  • A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.

Application and Permission

Permission

  • ETA-06/0175
  • ETA-06/0175
  • DoP 0235
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The FNA II with nail head is suitable for push-through installation.
  • The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
  • Available setting tools:
    FNA S-SBO to slip onto the drill,
    FNA S-SDS for series installation with a drilling hammer,
    FNA S-H for the manual installation of mounting rails.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Technical Data

Technical Data

ETA-approval
Drill diameter 6 [mm]
Min. drill hole depth for through fixings 115 [mm]
Anchor length 110 [mm]
Max. fixture thickness 75 [mm]
Head-Ø 13 [mm]
Packaging Folding box
Amount 50 [pcs.]
GTIN (EAN-Code) 4006209441183
Legend   =  Permission Available

Documents for Downloading

Additional Documents

Approvals

Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 1 MB) European Technical Assessment for fischer Nail anchor FNA II ETA-06/0175 02-03-2021
ETA - European Technical Assessment (PDF, 1 MB) European Technical Assessment for fischer Nail anchor FNA II ETA-06/0175 02-03-2021
DOP - Declaration of Performance (PDF, 1 MB) DOP - Declaration of Performance DoP 0235 16-03-2021
fe80::24a1:e71:f52e:7cbe%5