Nail anchor FNA II

The installation-friendly hammerset anchor for multiple fixings

The fischer nail anchor FNA II with a nail head is made from zinc-plated steel, stainless steel, and highly corrosion-resistant steel. The FNA II is primarily suitable for the anchoring of fire protection boards, ventilation systems, metal rails, and subframe systems. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is mounted in a few hammer blows or with a hammer drill in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

Product Description

Advantages

The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.

Available Product Variants

2 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Min. drill hole depth for through fixings

h₂

Anchor length

Legend = Permission Available — = Permission not Available

Viewed 2 of 2 variant (s)

Application and Permission

Permission

ETA-06/0175
DoP 0235

For Details see corresponding Documents

Assembly Instruction

Functionality

The FNA II with nail head is suitable for push-through installation.
The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
Available setting tools:
FNA S-SBO to slip onto the drill,
FNA S-SDS for series installation with a drilling hammer,
FNA S-H for the manual installation of mounting rails.

Documents for Downloading

Additional Documents

Load Table (PDF, 45 KB)

Approvals

Title	Type	Created	Valid Till
ETA - European Technical Assessment (PDF, 1 MB) European Technical Assessment for fischer Nail anchor FNA II	ETA-06/0175	02-03-2021
DOP - Declaration of Performance (PDF, 1 MB) DOP - Declaration of Performance	DoP 0235	16-03-2021

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

ETA-approval
Drill diameter d₀	6 [mm]
Min. drill hole depth for through fixings h₂	90 [mm]
Anchor length l	85 [mm]
Max. fixture thickness t _fix	50 [mm]
Head-Ø d_K	13 [mm]
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4006209441176

ETA-approval
Drill diameter d₀	6 [mm]
Min. drill hole depth for through fixings h₂	115 [mm]
Anchor length l	110 [mm]
Max. fixture thickness t _fix	75 [mm]
Head-Ø d_K	13 [mm]
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4006209441183