Product Category Picture
Application Picture
Application Picture
1   1

Heavy-duty anchor TA M-S

Heavy-duty internal threaded anchor with screw for low edge clearances

The fischer heavy-duty anchor TA M is an internal threaded anchor made from zinc-plated steel for pre-positioned installation. The heavy-duty anchor is ideal for anchoring fall protection devices, systems, and machines in non-cracked concrete. The optimised anchor geometry minimises setting energy and allows for use in really confined spaces. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial clearances.

Product Description

Advantages
  • The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
  • The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
  • The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
  • The red plastic cap protects against soiling and thus ensures free-running of the thread.

Available Product Variants


1 Product variant (s) found

1 Product variant (s) found

Variant
ETA-approval
Drill diameter

d0

Anchor length

l

Width across nut

SW

Art.-No. 090250

12 [mm]

56 [mm]

13 [mm]

Legend = Permission Available = Permission not Available
Viewed 1 of 1 variant (s)
0

Application and Permission

Applications
  • Steel constructions
  • Handrails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
  • Stand-off installations
Building materials
Approved for:
  • Concrete C20/25 to C50/60, non-cracked
Also suitable for:
  • Concrete C12/15
  • Natural stone with dense structure
* You can find detailed information on building materials in the registration document.

Permission

  • ETA-04/0003
  • DoP No. 0050
  • DoP No. 0263
  • DoP No. 0756-CPD-0756
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The TAM is suitable for pre-positioned installation.
  • When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
  • For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Documents for Downloading

Approvals

Title Type Created Valid Till
ETA Certification Document (PDF, 2 MB) European Technical Assessment for fischer Heavy-duty anchor TA M, TA M S, TA M T - Mechanical fasteners for use in concrete ETA-04/0003 12-06-2018
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance for fischer-Heavy-duty anchor TA M, TA M S, TA M T (Metal anchors for use in concrete (heavy-duty type)), according to European Technical Assessment ETA-04/0003 DoP No. 0050 19-06-2018
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance for fischer-Heavy-duty anchor TA M, TA M S, TA M T (Mechanical anchor for use in concrete), according to European Technical Assessment ETA-04/0003 DoP No. 0263 12-01-2021
DOP - Declaration of Performance (PDF, 141 KB) Declaration of Performance for fischer-Heavy-duty anchor TA M, TA M S, TA M T, according to European Technical Assessment ETA-04/0003 DoP No. 0756-CPD-0756 17-06-2013 17-06-2028

System Components & Related Categories

sc93-delivery-1