High performance anchor FH II-S

Strong, secure and aesthetic for a discreet fixing

The fischer high-performance anchor FH II-S with its hexagonal head is a sleeve anchor made from zinc-plated and stainless steel. The fischer high-performance anchor FH II-S with its hexagonal head is ideal for anchoring cantilevers, steel constructions, and cable trays in cracked and non-cracked concrete. The European Technical Approval and classification as per fire resistance class R 120 guarantee added safety. Furthermore, the international approvals cover applications in earth quake regions (Seismic C1 and C2). The anchor is installed in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. This pulls the fixture onto the base material. The black plastic ring prevents the undesired turning of the anchor and takes the torque slippage.

Product Description

Advantages

The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
The low profile of the screw head ensures for a discreet fixing.
The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
The optimised geometry intelligently reduces the energy required for assembly.
The approval regulates the use of hollow drills.

Available Product Variants

Application and Permission

Applications

Guard rails
Staircases
Consoles
Steel constructions
Ladders
Cable trays
Machines
Gates
Façades
Gratings

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

* You can find detailed information on building materials in the registration document.

Permission

ETA-07/0025
DoP No. 0020
DoP No. 0127
DoP No. 0756-CPD-0295
ESR-2691

For Details see corresponding Documents

Assembly Instruction

Functioning

The FH II is suitable for push-through installation.
When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base.
Available head shapes for flexible design solutions:
Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H).

Documents for Downloading

Additional Documents

Load table (PDF, 110 KB)

Approvals

Title	Type	Created
ETA - European Technical Assessment (PDF, 7 MB) European Technical Assessment for fischer High-Performance Anchor FH II, FH II-I. Torque-controlled expansion anchor for use in concrete	ETA-07/0025	28-08-2018
DOP - Declaration of Performance (PDF, 3 MB)	DoP No. 0020	16-12-2016
DOP - Declaration of Performance (PDF, 5 MB)	DoP No. 0127	11-09-2018
DOP - Declaration of Performance (PDF, 1 MB)	DoP No. 0756-CPD-0295	25-06-2013
ICC-Approval (PDF, 2 MB)	ESR-2691	01-04-2019