Product Category Picture
Application Picture
Application Picture
Application Picture
1   1

Sleeve anchor FSA-B

The sleeve anchor for the push-through installation of structural anchorings in non-cracked concrete

The fischer sleeve anchor FSA-B is made from zinc-plated steel with a nut and washer for structural anchors made from zinc-plated steel. The fischer sleeve anchor is ideal for the fixation of non-safety-relevant anchorings such as cantilevers, handrails, and cable trays in non-cracked concrete. The optimised anchor geometry offers a high shear load resistance and a high level of safety. The FSA-B is installed in a time-saving push-through installation. During tightening, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The recesses act as a crumple zone to take the torque slippage. In this way, the fixture is pulled onto the base material.

Product Description

Advantages
  • The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation.
  • The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B).
  • The detachable screw connection allows for surface flush removal.

Available Product Variants


2 Product variant (s) found

2 Product variant (s) found

Variant
Drill diameter

d0

Min. drill hole depth for through fixings

h2

Anchor length

l

Width across nut

SW

Art.-No. 068504

10 [mm]

90 [mm]

94 [mm]

13 [mm]

Art.-No. 068507

12 [mm]

90 [mm]

96 [mm]

17 [mm]

Viewed 2 of 2 variant (s)
0

Application and Permission

Applications
  • Handrails
  • Consoles
  • Ladders
  • Cable trays
  • Gates
  • Façades
  • Temporary or structural fixings
Building materials
Suitable for:
  • Concrete C12/15 to C20/25, non-cracked
  • Natural stone with dense structure
* You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality
  • The FSA is suitable for push-through installation.
  • When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
  • The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Documents for Downloading

Additional Documents

System Components & Related Categories

sc93-delivery-2